Jura F9 Service Manual download pdf (Page 25)

4 Permanent settings in programming mode

Permanent settings in programming mode always follow the same

model.

Example:Proceed as follows to change the coffee strength for one

coffee.

Precondition:‘Please select product’ is displayed.

 O T Press the P button.

‘Maintenance status’ (‘1/7’)

 g T Turn the Rotary Switch until ‘Product settings’ (‘3/7’) is dis-

played.

T Press the ‘Expert mode’ button.

‘Expert mode’

E Next select the button of the product for which you would like

to make settings. No product is prepared at this point.

T Press the ‘ >’ button (bottom right) until ‘Coffee’ is dis-

played.

T Press the ‘Coffee’ button.

‘Coffee’

T Press the ‘Coffee strength’ button.

‘Coffee’ / ‘Coffee strength’

 g T Turn the Rotary Switch to change the coffee strength set-

ting.

T Press the ‘Save’ button.

‘Saved’ appears briefly on the display.

‘Coffee’

 O T Press the P button to exit programming mode.

‘Please select product’

You have the option of replacing the four products on the start

screen with your personal favourites.

Example:Proceed as follows to replace ‘Latte macchiato’ on the

start screen with ‘Macchiato’.

Precondition:‘Please select product’ is displayed.

 O T Press the P button.

‘Maintenance status’ (‘1/7’)

 g T Turn the Rotary Switch until ‘Product settings’ (‘3/7’) is dis-

played.

Replacing products on

the start screen

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

No comments

Jura F9 Service Manual Page 25